SunGoldPower | 8KW 48V Split Phase Solar Inverter
Overview
-
Integrated System: This 8KW Pure Sine Wave Solar Inverter combines a maximum 200A battery charger with two built-in MPPT solar controllers. It supports a maximum open circuit voltage of 500VDC and offers both split-phase (120V/240V) and single-phase (120V) output. A Wi-Fi module is included for monitoring the inverter's status and parameters via a mobile app, and it is UL1741 listed by ETL.
-
Parallel Configuration: You can connect up to six units in parallel for a combined output of 48KW. This setup allows for 120V single-phase, 120V/240V split-phase, or 208V three-phase support (with more than three units), enhancing both power and surge capacity.
-
Reliable AC Output with Protection: The inverter provides a rated output power of 8,000W and a maximum peak power of 16,000W, with a motor capacity of 6HP. It features protections for PV input over-voltage/current, AC input over-voltage, battery over-voltage, and overload.
-
Flexible Charging and Output Modes: Offers four charging modes: Hybrid Charging, Utility Priority Charging, Solar Priority Charging, and Only Solar Charging. It also includes four output modes: Utility Priority, Solar and Utility Hybrid, Solar Priority, and Inverter Priority to accommodate various requirements.
-
Time-Slot Charging/Discharging: The SPH series includes a time-slot charging and discharging feature, enabling users to set specific charging and discharging times based on local peak and off-peak tariffs for optimized use of utility power and PV energy.
-
Battery Compatibility: Compatible with 48V AGM/Sealed, Gel, Flooded, and Lithium batteries, this inverter supports a user mode for all battery types and can function without a battery. When a lithium battery is inactive, mains power and photovoltaics can activate it. It also supports CAN, USB, and RS485 communication with SunGoldPower batteries.
Key Features:
- Integrated with 2 Solar Controllers
- Supports Max 11000W PV Input and 500V Voltage
- Includes Energy Saving Mode Function
- Features Time-Slot Charging and Discharging Settings
- Activates Li-ion Battery via Mains/Photovoltaic Power Supply Access
- Offers Split-Phase (L-N=120V, L-L=240V) and Single-Phase (L-N=240V) Pure Sine Wave Output
- Compatible with Various Batteries and Communication Systems
- Provides 4 Charging Modes
- Equipped with Two Solar Inputs with Dual 99.9% Efficiency MPPT
- Supports Maximum 22A Current in a Single Circuit for High Power Modules
- WiFi Monitoring Enabled for Quick and Easy Access to Inverter Data via Mobile Phones
WIFI MONITORING
Configured with Wi-Fi components, allowing user to quick and easy access to inverter data on mobile phone.
System Connection
Solar panels can charge the battery and provide power to the load through the inverter. In case the solar panels or battery are without power, you can supply power to the load and charge the battery using the grid or a generator.
Grid Tied Function
A stand-alone solar inverter works with solar panels to produce electricity, storing it in solar batteries, and operates autonomously, disconnected from the power grid.
Specifications
Manuals and Downloads
8K-10KW48V Split Phase Solar Inverter User's Manual
Warranty
2 Year Warranty